EnGenius EnMesh Dot (EMD1)
EnGenius EnMesh Dot (EMD1)
Manuf (OEM/ODM): Senao
FCC approval date: 05 June 2018
Country of manuf.: Taiwan
Series: AC1300
Type: access point, mesh node
FCC ID: A8J-EMD1
Power: ? VDC, ? A
Connector type: AC (direct)
CPU1: Qualcomm IPQ4018 (710 MHz, 4 cores)
FLA1: 32 MiB33,554,432 B <br />262,144 Kib <br />32,768 KiB <br />256 Mib <br />0.0313 GiB <br /> (Winbond Model?)
RAM1: 256 MiB268,435,456 B <br />2,097,152 Kib <br />262,144 KiB <br />2,048 Mib <br />0.25 GiB <br /> (Nanya NT5CC128M16IP-DI)
Expansion IFs: none specified
WI1 chip1: Qualcomm IPQ4018
WI1 802dot11 protocols: bgn
WI1 MIMO config: 2x2:2
WI1 antenna connector: none
WI2 chip1: Qualcomm IPQ4018
WI2 802dot11 protocols: an+ac
WI2 MIMO config: 2x2:2
WI2 antenna connector: none
ETH chip1: Qualcomm IPQ4018
ETH chip2: Qualcomm Atheros QCA8072
LAN speed: 1G
LAN ports: 1
abgn+ac
Additional chips
2.4GHz WLAN/BT FEM;Skyworks;SKY85303-11;SKY11, 85303, <..>;2;
5GHz FEM;Skyworks;SKY85748-11;SKY, 748, 2I00F;2;
Flags: Wave2, 256QAM, MU-MIMO, Internet Speed Test
Default IP address: 192.168.1.1
the IP 192.168.1.1 is used by 1304 additional devices
of which 20 are EnGenius devices
Default login user: admin
Default login password: admin
admin:admin credentials used by 1326 additional devices
of which 50 are EnGenius devices
802dot11 OUI: none specified
| CPU1 brand | WI1 chip1 brand | WI2 chip1 brand | |
|---|---|---|---|
| EnGenius EnMesh (EMR3000v1) | Qualcomm Atheros | Qualcomm Atheros | Qualcomm Atheros |
| EnGenius EnMesh (EMR3000v2) | Qualcomm Atheros | Qualcomm Atheros | Qualcomm Atheros |
| EnGenius EnMesh Dot (EMD1) | Qualcomm | Qualcomm | Qualcomm |
| EnGenius EnMesh Dot (EMD2) | Qualcomm | Qualcomm | Qualcomm |
For a list of all currently documented Qualcomm chipsets with specifications, see Qualcomm.
AC1300 Wave 2 Dual-Band Access Point
"EMD1 (FCC) MB VER:0.20" is silkscreened on the board in the FCC photos.
- Additional models are also mentioned in FCC docs.
- EMD1 is the main test model: EnGenius EnMesh Dot
- ERP1 is internally identical to the EMD1 but it only supports
- Repeater mode while EMD1 supports Mesh mode.
- EMD2 is powered via PoE or an external power supply
- instead of direct AC power but has identical RF circuitry.
