Pace 5268AC

From WikiDevi.Wi-Cat.RU
Jump to navigation Jump to search

Pace 5268AC
Availability: now

Manuf (OEM/ODM): Foxconn

FCC approval date: 19 May 2014
Country of manuf.: China

Type: CPE, dsl modem, wireless router

FCC ID: PGR5200AC
IC ID: 3439B-5200AC
US: 6KRDL02B5200AC

Power: 12 VDC, 3 A
Connector type: barrel

CPU1: Broadcom BCM63168 (400 MHz, 2 cores)
CPU2: Quantenna QT3840BC (500 MHz, 2 cores)
FLA1: 128 MiB134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br /> (Samsung NAND)
FLA2: 16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> (Winbond SPI)
RAM1: 256 MiB268,435,456 B <br />2,097,152 Kib <br />262,144 KiB <br />2,048 Mib <br />0.25 GiB <br /> (Samsung Model?)
RAM2: 128 MiB134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br /> (Samsung Model?)

Expansion IFs: USB 2.0
USB ports: 1

WI1 chip1: Broadcom BCM63168
WI1 802dot11 protocols: bgn
WI1 MIMO config: 2x2:2
WI1 antenna connector: U.FL
WI2 chip1: Quantenna QT3840BC
WI2 chip2: Quantenna QT2518B
WI2 802dot11 protocols: an+ac
WI2 MIMO config: 4x4:4
WI2 antenna connector: U.FL

ETH chip1: Broadcom BCM63168
Switch: Broadcom BCM53125
LAN speed: 1G
LAN ports: 4

abgn+ac

Stock bootloader: U-Boot

Stock FW OS: Linux 2.6.30

Flags: VDSL2, ADSL2+

Default SSID: PACE501
, PACE501_5G
Default IP address: 192.168.1.254
the IP 192.168.1.254 is used by 158 additional devices
of which 1 are Pace devices

802dot11 OUI: 60:FE:20, F8:2C:18
Ethernet OUI: 60:FE:20, F8:2C:18

For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.
For a list of all currently documented Quantenna chipsets with specifications, see Quantenna.


Wireless 802.11AC DSL Residential Gateway

Product page (Arris)
  • 5268AC XDSL VOICE GATEWAY  • FCC Doc
VDSL2, ADSL2+ Gateway with 802.11ac Wi-Fi & HomePNA
5GHz 4x4 802.11ac (1733Mbps) / 2.4GHz 2x2 802.11n (300Mbps)
Dual-core processor with hardware accelerated routing for exceptional performance.
Based on cutting-edge 4x4 MU-MIMO Wi-Fi technology 5268AC intelligent gateway.
In 2.4GHz band gateway uses 802.11n 2x2 MIMO technology, transmit power 100 mW.
Integrated Gigabit Ethernet switch and dedicated Gigabit Ethernet WAN port enables.

The manual states the default IP is 192.168.1.254.

Forum threads

Serial

 • Bootlog
@@mmmmmmmmoyM~oV3g_w_o{{{{~KmK!S}_p[b?}cks|}{m{__o

                                                   !
                                                    I0
                                                      <I0MyY~o|3q|9{}c{6Dws>{XA
A0qy
     }~{}[[o
            q
             ZQp
                >?kq0I{l{_[__m{?oy_     HOLA
CPUI
L1CI
HOLA
CPUI
L1CI
DRAM
----
PHYS
STRF
400H
PHYE
DDR3
SIZ4
SIZ3
DINT
USYN
LSYN
MFAS
LMBE
RACE
PASS
----
CODE
L12F
MAIN

****************************************************************
****************************************************************
************************$

U-Boot 1.3.3(8.99.61.509224) (Aug  5 2015 - 18:13:23)

CPU:   Broadcom BCM63268 v8.0 64 kB I-Cache 32 kB D-Cache
BOARD: Pace Broadcom BCM63168D0
DRAM:  256 MB
Clearing heap 4259840 bytes from 8fb84000 to 8ff94000
NAND:  BCMNAND: Bootcfg=40000001 Cfg=15142200 CsAndNor=0 Base=0 Acc=f7001010 Id=c2f1801d
BCMNAND: System strap=1fff5bf 2048,11,1
BCMNAND: NAND: AccControl=f7001010
BCMNAND: Nand Part Name: Macronix MX30LF1G08AA LP
BCMNAND: size=128MB, block=128KB, page=2048B, spare=64
BCMNAND: Init done: 0
OOB[1/131072]ff ff cf 69 ff ff 99 a6 42 6f 6f 74 43 6f 64 65
OOB[2/262144]ff ff 96 ff ff ff 3 f 42 6f 6f 74 43 6f 64 65
OOB[3/393216]ff ff cf 0 ff ff f ff 42 6f 6f 74 43 6f 64 65
OOB[4/524288]ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
OOB scan: Found pattern mismatch at 4/524288
Fixed up MTD partition to mtdparts=mtd-0:524288(loader),1048576(mtdoops),-(tlpart)
OpenTL: Going to add mtd partition tlpart
Creating 1 MTD partitions on "nand0":
0x00180000-0x08000000 : "tlpart"
BCMNAND: IsBad block at off=69337088 is bad
OPENTL: add_mtd for tlpart
nflaattach: pages per unit=64 shift=17 sectors_per_page=4
TL_debug: before mount mediasize=64768 size=64768 partiton 0 to 1012 spares=85
Adjusting virtual blocks 1012 to account for 30 bb blocks
Adjusting virtual blocks 982 to account for 1 stat blocks
resetting statsBlock statistics Num Used=712 Num Free=299 Bad=1

TL_debug: after mount stat_blocks=1 virt=982 head_pages=1
geometry wasted 252 sectors
nand_geom: cap=251132 cyl=980 nhead=16 nsectors=16
OPENTL: Found new opentla
OpenTL: get_dev hook called
-----------get_partition_info_disklabel: Called part=1------------
** Checking 5 partitions...
** Partition(0) 8/80 blocksize=512
** Partition(1) 88/80 blocksize=512
** Partition(2) 0/3c200 blocksize=512
** Partition(3) 108/78 blocksize=512
** Partition(4) 180/3c080 blocksize=512
** Part(1) is at 8 to 128 sectorsize=512
tldisk primary, 8:128
-----------get_partition_info_disklabel: Called part=2------------
** Part(2) is at 136 to 128 sectorsize=512
tldisk backup, 136:128
env dump -----54 e4 2e ca 0 62 6f 6f 74 63 6d 64 3d 69 66 20 74 6c 20 63 68 65 6
3 6b 66 73 74 79 70 65 20 35
tldisk env part info:  CRC=54e42eca/54e42eca env_size=65531
env dump -----54 e4 2e ca 0 62 6f 6f 74 63 6d 64 3d 69 66 20 74 6c 20 63 68 65 6
3 6b 66 73 74 79 70 65 20 35
tldisk env part info:  CRC=54e42eca/54e42eca env_size=65531
In:    serial
Out:   serial
Err:   serial
Board Id : 260-2173300
Hello world
Net:   br0
Hit any key to stop autoboot:  0
OpenTL: get_dev hook called
-----------get_partition_info_disklabel: Called part=5------------
** Part(5) is at 384 to 245888 sectorsize=512
OpenTL: get_dev hook called
-----------get_partition_info_disklabel: Called part=5------------
** Part(5) is at 384 to 245888 sectorsize=512
OpenTL: get_dev hook called
Using device opentl 0:5, directory: /
-----------get_partition_info_disklabel: Called part=5------------
** Part(5) is at 384 to 245888 sectorsize=512
<DIR>       1024 .
<DIR>       1024 ..
<DIR>    1258496 lost+found
<DIR>       1024 tmp
<DIR>       1024 sys1
<DIR>       1024 bcm
<DIR>       1024 sys2
<DIR>       1024 cm
<DIR>       1024 pkg
<DIR>       1024 sysinit
<DIR>       1024 subsys
               2 isupgrade
<DIR>       1024 service
<DIR>       1024 config
OpenTL: get_dev hook called
Using device opentl0, partition 5
-----------get_partition_info_disklabel: Called part=5------------
** Part(5) is at 384 to 245888 sectorsize=512

Loading from block device opentl device 0, partition 5: Name: Disklabel:4  Type:
 U-Boot  File:/sys1/uImage
-----------get_partition_info_disklabel: Called part=5------------
** Part(5) is at 384 to 245888 sectorsize=512

2990665 bytes read
Upgrade Image present. Checking image integrity

## Checking Image at 80800000 ...
   Legacy image found
   Image Name:   Install image
   Created:      2016-01-21  22:47:52 UTC
   Image Type:   MIPS Linux Multi-File Image (gzip compressed)
   Data Size:    2990601 Bytes =  2.9 MB
   Load Address: 80010000
   Entry Point:  80389b70
   Contents:
      Image 0: 2232244 Bytes =  2.1 MB
      Image 1: 758345 Bytes = 740.6 kB
   Verifying Checksum ... OK
Valid kernel Found
OpenTL: get_dev hook called
Using device opentl0, partition 5
-----------get_partition_info_disklabel: Called part=5------------
** Part(5) is at 384 to 245888 sectorsize=512

Loading from block device opentl device 0, partition 5: Name: Disklabel:4  Type:
 U-Boot  File:/sys1/initrd
-----------get_partition_info_disklabel: Called part=5------------
** Part(5) is at 384 to 245888 sectorsize=512

** Unable to read "/sys1/initrd" from opentl 0:5 **
No initrd Image
## Booting kernel from Legacy Image at 80800000 ...
   Image Name:   Install image
   Created:      2016-01-21  22:47:52 UTC
   Image Type:   MIPS Linux Multi-File Image (gzip compressed)
   Data Size:    2990601 Bytes =  2.9 MB
   Load Address: 80010000
   Entry Point:  80389b70
   Contents:
      Image 0: 2232244 Bytes =  2.1 MB
      Image 1: 758345 Bytes = 740.6 kB
   Verifying Checksum ... OK
   Uncompressing Multi-File Image ... OK
## Loading init Ramdisk from multi component Legacy Image at 80800000 ...
## U-boot passing env 0x80A21000
## U-boot passing env 0xB9249

Starting kernel commandline=console=ttyS0,115200 mtdoops.mtddev=mtdoops mtdoops.
record_size=131072 mtdparts=mtd-0:524288(loader),1048576(mtdoops),-(tlpart) init
=/bin/init 6,afb63fb0,afb64440...

[    0.000000] Linux version 2.6.30 (buildbot@krackel) (gcc version 4.4.2 (Buildroot 2010.02-git) ) #2 SMP PREEMPT Thu Jan 21 16:46:53 CST 2016
[    0.000000] BCMNAND: Bootcfg=40000001 Cfg=15142200 CsAndNor=0 Base=0 Acc=f7001010 Id=c2f1801d
[    0.000000] BCMNAND: System strap=1fff5bf 2048,11,1
[    0.000000] BCMNAND: NAND: AccControl=f7001010
[    0.000000] BCMNAND: size=128MB, block=128KB, page=2048B, spare=64
[    0.000000] BRCMNAND device: block: 131072 page: 2048 name: nand0
[    0.000000] Nand Scan: Block 529 is factory bad...
[    0.000000] >> nand_scan_part - Total 1 bad and 1023 good blocks found
[    0.000000] BRCM NAND flash device: name nand0, id 0xc2f1 size 131072KB
[    0.000000]  detected as Boot Flash
[    0.000000] kerSysEarlyFlashInit: NVRAM size=4092 CRC 8e6f3237 8e6f3237
[    0.000000] 260-2173300 prom init
[    0.000000] Found arg console=ttyS0,115200 of length 20 left=4074
[    0.000000] Found arg mtdoops.mtddev=mtdoops of length 22 left=4053
[    0.000000] Found arg mtdoops.record_size=131072 of length 26 left=4030
[    0.000000] Found arg mtdparts=mtd-0:524288(loader),1048576(mtdoops),-(tlpart) of length 56 left=4003
[    0.000000] Found arg init=/bin/init of length 14 left=3946
[    0.000000] Found env memsize=256 of length 11
[    0.000000] Found env rd_start=0x80A21000 of length 19
[    0.000000] Found env rd_size=0xB9249 of length 15
[    0.000000] Found env flash_start=0xFFFFCDDF of length 22
[    0.000000] Found env flash_size=0xFFFFDBFF of length 21
[    0.000000] U-boot passed args  console=ttyS0,115200 console=ttyS0,115200 
mtdoops.mtddev=mtdoops mtdoops.record_size=131072 mtdparts=mtd-0:524288(loader),
1048576(mtdoops),-(tlpart) init=/bin/init rd_start=0x80A21000 rd_size=0xB9249 board
.battery_index=0 board.gmac=1 board.dsl_afe=3 board.enet_mac=12 board.ext_intr=6
 board.board_features=9 board.gpio_map=9 board.gpio_overlay=8 board.single_lan_led=1 
 board.srom_patch=5 board.voice_parm=1 board.wlan_config=2  left=3667 copied=429
[    0.000000] CPU revision is: 0002a080 (Broadcom4350)
[    0.000000] DSL SDRAM reserved: 0x180000
[    0.000000] Determined physical RAM map:
[    0.000000]  memory: 0fe80000 @ 00000000 (usable)
[    0.000000] Initial ramdisk at: 0x80a21000 (758345 bytes)
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000000 -> 0x00001000
[    0.000000]   Normal   0x00001000 -> 0x0000fe80
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[1] active PFN ranges
[    0.000000]     0: 0x00000000 -> 0x0000fe80
[    0.000000] On node 0 totalpages: 65152
[    0.000000] free_area_init_node: node 0, pgdat 804716f0, node_mem_map 81000000
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 4064 pages, LIFO batch:0
[    0.000000]   Normal zone: 477 pages used for memmap
[    0.000000]   Normal zone: 60579 pages, LIFO batch:15
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 64643
[    0.000000] Kernel command line:  console=ttyS0,115200 console=ttyS0,115200 
mtdoops.mtddev=mtdoops mtdoops.record_size=131072 mtdparts=mtd-0:524288(loader),
1048576(mtdoops),-(tlpart) init=/bin/init rd_start=0x80A21000 rd_size=0xB9249 
board.battery_index=0 board.gmac=1 board.dsl_afe=3 board.enet_mac=12 board.ext_intr=6 
board.board_features=9 board.gpio_map=9 board.gpio_overlay=8 board.single_lan_led=1 
board.srom_patch=5 board.voice_parm=1 board.wlan_config=2
[    0.000000] wait instruction: enabled
[    0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 16 bytes.
[    0.000000] Primary data cache 32kB, 2-way, VIPT, cache aliases, linesize 16bytes
[    0.000000] RCU-based detection of stalled CPUs is enabled.
[    0.000000] NR_IRQS:128
[    0.000000] PID hash table entries: 1024 (order: 10, 4096 bytes)
[    0.000000] console [ttyS0] enabled
[    0.001000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.003000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.004000] Allocating memory for DSP module core and initialization code
[    0.005000] Allocated DSP module memory - CORE=0x0 SIZE=0, INIT=0x0 SIZE=0
[    0.026000] Memory: 247000k/260608k available (3597k kernel code, 13404k reserved, 912k data, 184k init, 0k highmem)
[    0.027000] Calibrating delay loop... 398.33 BogoMIPS (lpj=199168)
[    0.049000] Mount-cache hash table entries: 512
[    0.050000] --Kernel Config--
[    0.051000]   SMP=1
[    0.052000]   PREEMPT=1
[    0.053000]   DEBUG_SPINLOCK=1
[    0.054000]   DEBUG_MUTEXES=1
[    0.055000] Broadcom Logger v0.1 Jan 21 2016 16:19:52
[    0.061000] CPU revision is: 0002a080 (Broadcom4350)
[    0.061000] Primary instruction cache 64kB, VIPT, 4-way, linesize 16 bytes.
[    0.061000] Primary data cache 32kB, 2-way, VIPT, cache aliases, linesize 16bytes
[    0.062000] Calibrating delay loop... 403.45 BogoMIPS (lpj=201728)
[    0.082000] Brought up 2 CPUs
[    0.083000] Synchronize counters across 2 CPUs: done.
[    0.086000] khelper used greatest stack depth: 15316 bytes left
[    0.091000] net_namespace: 1180 bytes
[    0.093000] NET: Registered protocol family 16
[    0.097000]
[    0.097000] *** kerSysFlashInit ....
[    0.440000] Internal 1P2 VREG will be shutdown if unused...Unused, turn it off (00008a56-00008a66=-16<300)
[    0.442000] registering PCI controller with io_map_base unset
[    0.443000] registering PCI controller with io_map_base unset
[    0.445000] khelper used greatest stack depth: 15256 bytes left
[    0.485000] khelper used greatest stack depth: 15040 bytes left
[    0.500000] bio: create slab <bio-0> at 0
[    0.504000] SCSI subsystem initialized
[    0.506000] usbcore: registered new interface driver usbfs
[    0.507000] usbcore: registered new interface driver hub
[    0.508000] usbcore: registered new device driver usb
[    0.510000] pci 0000:00:00.0: reg 10 32bit mmio: [0x10004000-0x10005fff]
[    0.511000] pci 0000:00:00.0: supports D1 D2
[    0.512000] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
[    0.513000] pci 0000:00:00.0: PME# disabled
[    0.514000] pci 0000:00:09.0: reg 10 32bit mmio: [0x10002600-0x100026ff]
[    0.515000] pci 0000:00:0a.0: reg 10 32bit mmio: [0x10002500-0x100025ff]
[    0.518000] pci 0000:01:00.0: PME# supported from D0 D3hot
[    0.519000] pci 0000:01:00.0: PME# disabled
[    0.521000] pci 0000:01:00.0: PCI bridge, secondary bus 0000:02
[    0.522000] pci 0000:01:00.0:   IO window: disabled
[    0.523000] pci 0000:01:00.0:   MEM window: disabled
[    0.524000] pci 0000:01:00.0:   PREFETCH window: disabled
[    0.525000] PCI: Setting latency timer of device 0000:01:00.0 to 64
[    0.527000] khelper used greatest stack depth: 14648 bytes left
[    0.531000] skbFreeTask created successfully
[    0.532000] BLOG v3.0 Initialized
[    0.533000] BLOG Rule v1.0 Initialized
[    0.534000] Broadcom IQoS v0.1 Jan 21 2016 16:23:37 initialized
[    0.535000] Broadcom GBPM v0.1 Jan 21 2016 16:23:37 initialized
[    0.542000] NET: Registered protocol family 8
[    0.543000] NET: Registered protocol family 20
[    0.550000] NET: Registered protocol family 2
[    0.566000] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.575000] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[    0.583000] TCP bind hash table entries: 8192 (order: 5, 163840 bytes)
[    0.591000] TCP: Hash tables configured (established 8192 bind 8192)
[    0.598000] TCP reno registered
[    0.605000] NET: Registered protocol family 1
[    0.610000] Unpacking initramfs...

[    2.127000] Freeing initrd memory: 740k freed
[    2.137000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    2.143000] squashfs: version 4.0 with LZMA457 ported by BRCM
[    2.150000] fuse init (API version 7.11)
[    2.154000] msgmni has been set to 484
[    2.164000] io scheduler noop registered (default)
[    2.169000] PCI: Setting latency timer of device 0000:01:00.0 to 64
[    2.198000] khelper used greatest stack depth: 14504 bytes left
[    2.216000] loop: module loaded
[    2.219000] Driver 'sd' needs updating - please use bus_type methods
[    2.227000] PPP generic driver version 2.4.2
[    2.232000] PPP Deflate Compression module registered
[    2.237000] PPP BSD Compression module registered
[    2.242000] NET: Registered protocol family 24
[    2.255000] BCMNAND: pReg=40000001 Cfg=15142200 CsAndNor=0 Acc=f7001010 Id=c2f1801d
[    2.263000] BCMNAND: System strap=1fff5bf 800,11,1
[    2.268000] BCMNAND: NAND: AccControl=f7001010
[    2.272000] BCMNAND: size=128MB, block=128KB, page=2048B, spare=64
[    2.278000] BCMNAND: Init done
[    2.282000] MTD partition(0) offset=0 size=524288 num=3
[    2.287000] MTD partition(1) offset=524288 size=1048576 num=3
[    2.293000] MTD partition(2) offset=1572864 size=132644864 num=3
[    2.299000] 3 cmdlinepart partitions found on MTD device mtd-0
[    2.305000] Creating 3 MTD partitions on "mtd-0":
[    2.310000] 0x000000000000-0x000000080000 : "loader"
[    2.318000] 0x000000080000-0x000000180000 : "mtdoops"
[    2.331000] mtdoops: Attached to MTD device 1
[    2.336000] mtdoops: ready 0, 1
[    2.340000] 0x000000180000-0x000008000000 : "tlpart"
[    2.370000] BCMNAND: IsBad block at off=69337088 is bad
[    2.431000] ntl_init_phase_1: adding EB 517 to bad list
[    2.598000]  opentla:tldisk_partition: going to enumerate
[    2.607000] parse_bsd: tldisk header...
[    2.611000]  opentla0: <tldisk:
[    2.614000] * parse_bsd: Partition 8/80 1d/0
[    2.619000] parse_bsd: adding tldisk partition at 1/8
[    2.624000]  opentla1
[    2.626000] * parse_bsd: Partition 88/80 1d/0
[    2.631000] parse_bsd: adding tldisk partition at 2/8
[    2.636000]  opentla2
[    2.638000] * parse_bsd: Partition 108/78 1c/0
[    2.643000] parse_bsd: adding tldisk partition at 3/8
[    2.648000]  opentla3
[    2.651000] * parse_bsd: Partition 180/3c080 11/0
[    2.656000] parse_bsd: adding tldisk partition at 4/8
[    2.661000]  opentla4 >
[    2.669000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.676000] PCI: Enabling device 0000:00:0a.0 (0000 -> 0002)
[    2.682000] PCI: Setting latency timer of device 0000:00:0a.0 to 64
[    2.689000] ehci_hcd 0000:00:0a.0: EHCI Host Controller
[    2.695000] ehci_hcd 0000:00:0a.0: new USB bus registered, assigned bus number 1
[    2.703000] ehci_hcd 0000:00:0a.0: Enabling legacy PCI PM
[    2.729000] ehci_hcd 0000:00:0a.0: irq 18, io mem 0x10002500
[    2.740000] ehci_hcd 0000:00:0a.0: USB f.f started, EHCI 1.00
[    2.746000] usb usb1: configuration #1 chosen from 1 choice
[    2.753000] hub 1-0:1.0: USB hub found
[    2.757000] hub 1-0:1.0: 2 ports detected
[    2.764000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    2.770000] PCI: Enabling device 0000:00:09.0 (0000 -> 0002)
[    2.776000] PCI: Setting latency timer of device 0000:00:09.0 to 64
[    2.783000] ohci_hcd 0000:00:09.0: OHCI Host Controller
[    2.789000] ohci_hcd 0000:00:09.0: new USB bus registered, assigned bus number 2
[    2.797000] ohci_hcd 0000:00:09.0: irq 17, io mem 0x10002600
[    2.858000] usb usb2: configuration #1 chosen from 1 choice
[    2.864000] hub 2-0:1.0: USB hub found
[    2.868000] hub 2-0:1.0: 2 ports detected
[    2.875000] usbcore: registered new interface driver usblp
[    2.881000] Initializing USB Mass Storage driver...
[    2.886000] usbcore: registered new interface driver usb-storage
[    2.893000] USB Mass Storage support registered.
[    2.899000] Registered led device: pace-5268:green:ethernet
[    2.905000] Registered led device: pace-5268:red:ethernet
[    2.911000] Registered led device: pace-5268:red:service
[    2.917000] Registered led device: pace-5268:green:service
[    2.924000] Registered led device: pace-5268:red:power
[    2.929000] Registered led device: pace-5268:green:power
[    2.936000] Registered led device: pace-5268:green:phone2
[    2.942000] Registered led device: pace-5268:red:phone2
[    2.948000] Registered led device: pace-5268:green:phone1
[    2.954000] Registered led device: pace-5268:red:phone1
[    2.960000] Registered led device: pace-5268:green:dsl2
[    2.966000] Registered led device: pace-5268:red:dsl2
[    2.972000] Registered led device: pace-5268:green:dsl1
[    2.978000] Registered led device: pace-5268:red:dsl1
[    2.984000] Registered led device: pace-5268:green:wps
[    2.990000] Registered led device: pace-5268:red:wps
[    2.996000] Registered led device: pace-5268:green:wifi
[    3.002000] Registered led device: pace-5268:red:wifi
[    3.008000] Registered led device: pace-5268:green:usb
[    3.014000] Registered led device: pace-5268:red:usb
[    3.020000] Registered led device: pace-5268:red:hpna
[    3.025000] brcmboard: brcm_board_init entry
[    3.030000] @@@ System Mac address table initialized ...
[    3.035000] SES: Button Interrupt 0x1 is enabled
[    3.040000] SES: LED GPIO 0x24 is enabled
[    3.044000] PCIe: No device found - Powering down
[    3.251000] IRQ 8/brcm_8: IRQF_DISABLED is not guaranteed on shared IRQs
[    3.263000] Serial: BCM63XX driver $Revision: 3.00 $
[    3.268000] Magic SysRq enabled (type ^ h for list of supported commands)
[    3.275000] ttyS0 at MMIO 0xb0000180 (irq = 13) is a BCM63XX
[    3.281000] ttyS1 at MMIO 0xb00001a0 (irq = 42) is a BCM63XX
[    3.288000] Total # RxBds=1724
[    3.291000] bcmPktDmaBds_init: Broadcom Packet DMA BDs initialized
[    3.291000]
[    3.299000] bcmPktDma_init: Broadcom Packet DMA Library initialized
[    3.305000] bcmxtmrt: Broadcom BCM3168D0 ATM/PTM Network Device v0.5 Jan 21 2016 16:23:29
[    3.314000] IPSEC SPU: SUCCEEDED
[    3.318000] GACT probability NOT on
[    3.322000] Mirror/redirect action on
[    3.326000] u32 classifier
[    3.328000]     input device check on
[    3.332000]     Actions configured
[    3.336000] Netfilter messages via NETLINK v0.30.
[    3.344000] GRE over IPv4 tunneling driver
[    3.351000] TCP cubic registered
[    3.354000] Initializing XFRM netlink socket
[    3.359000] NET: Registered protocol family 10
[    3.377000] IPv6 over IPv4 tunneling driver
[    3.395000] NET: Registered protocol family 17
[    3.399000] NET: Registered protocol family 15
[    3.404000] Initializing MCPD Module
[    3.408000] Ebtables v2.0 registered
[    3.412000] ebt_time registered
[    3.415000] ebt_ftos registered
[    3.418000] ebt_wmm_mark registered
[    3.423000] RPC: Registered udp transport module.
[    3.428000] RPC: Registered tcp transport module.
[    3.433000] 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
[    3.440000] All bugs added by David S. Miller <davem@redhat.com>
[    3.450000] Freeing unused kernel memory: 184k freed
[    3.479000] mount used greatest stack depth: 14368 bytes left
[    3.678000] mdev used greatest stack depth: 14192 bytes left

e2fsck 1.42.7 (21-Jan-2013)
/dev/opentla4 was not cleanly unmounted, check forced.
Pass 1: Checking inodes, blocks, and sizes
Pass 2: Checking directory structure
Pass 3: Checking directory connectivity
Pass 4: Checking reference counts
Pass 5: Checking group summary information
Block bitmap differences:  -46610 +46623 +46658
Fix? yes

Free blocks count wrong for group #6 (7345, counted=7344).
Fix? yes

Free blocks count wrong (88239, counted=88222).
Fix? yes


/dev/opentla4: ***** FILE SYSTEM WAS MODIFIED *****

         134 inodes used (1.72%, out of 7808)
           0 non-contiguous files (0.0%)
           0 non-contiguous directories (0.0%)
             # of inodes with ind/dind/tind blocks: 10/4/0
       34722 blocks used (28.24%, out of 122944)
           0 bad blocks
           0 large files

          72 regular files
          53 directories
           0 character device files
           0 block device files
           0 fifos
           0 links
           0 symbolic links (0 fast symbolic links)
           0 sockets
------------
         125 files
e2fsck returned: 1
[    6.506000] mount used greatest stack depth: 14104 bytes left
[    6.524000] mount used greatest stack depth: 13952 bytes left
[    9.631000] cp used greatest stack depth: 13744 bytes left
mknod: /dev/brcmboard: File exists
[   12.435000] bcm_ingqos: module license 'Proprietary' taints kernel.
[   12.442000] Disabling lock debugging due to kernel taint
[   12.471000] Broadcom Ingress QoS Module  Char Driver v0.1 Jan 21 2016 16:21:36 Registered<243>
[   12.480000]
[   12.480000] Broadcom Ingress QoS ver 0.1 initialized
[   12.609000] brcmchipinfo: brcm_chipinfo_init entry
[   12.708000] BPM: tot_mem_size=268435456B (256MB), buf_mem_size=40265310B (38MB), num of buffers=18921, buf size=2128
[   12.719000] Broadcom BPM Module Char Driver v0.1 Jan 21 2016 16:20:15 Registered<244>
[   13.093000] [NTC bpm] bpm_set_status: BPM status : enabled
[   13.093000]
[   13.197000] NBUFF v1.0 Initialized
[   13.209000] Initialized fcache state
[   13.214000] Broadcom Packet Flow Cache  Char Driver v2.2 Jan 21 2016 16:21:37 Registered<242>
[   13.223000] Created Proc FS /procfs/fcache
[   13.227000] Broadcom Packet Flow Cache registered with netdev chain
[   13.234000] Broadcom Packet Flow Cache learning via BLOG enabled.
[   13.241000] Constructed Broadcom Packet Flow Cache v2.2 Jan 21 2016 16:21:37
[   13.597000] chipId 0x631680D0
[   13.601000] Broadcom Forwarding Assist Processor (FAP) Char Driver v0.1 Jan 21 2016 16:21:23 Registered <241>
[   13.611000] Enabling SMISBUS PHYS_FAP_BASE[0] is 0x10c01000
[   13.637000] FAP Soft Reset Done
[   13.640000] 4ke Reset Done
[   13.653000] Enabling SMISBUS PHYS_FAP_BASE[1] is 0x10c01000
[   13.679000] FAP Soft Reset Done
[   13.682000] 4ke Reset Done
[   13.694000] FAP Debug values at 0xabb22d00 0xabba2d00
[   13.701000] Allocated FAP0 GSO Buffers (0xABB33D88) : 1048576 bytes @ 0xAB400000
[   13.710000] Allocated FAP1 GSO Buffers (0xABBB3D88) : 1048576 bytes @ 0xAB500000
[   13.718000] Allocated FAP0 TM SDRAM Queue Storage (abb33d8c) : 390144 bytes @ ab600000
[   13.727000] Allocated FAP1 TM SDRAM Queue Storage (abbb3d8c) : 390144 bytes @ ab680000
[   13.741000] [NTC fapProto] fapReset  : Reset FAP Protocol layer
[   13.748000] fapDrv_construct: FAP0: pManagedMemory=b0820650. wastage 8 bytes
[   13.756000] fapDrv_construct: FAP1: pManagedMemory=b0a20650. wastage 8 bytes
[   13.763000] [FAP0] DSPRAM : stack <0x80000000><1536>, global <0x80000600><4256>, free <2400>, total<8192>
[   13.773000] [FAP1] DSPRAM : stack <0x80000000><1536>, global <0x80000600><4256>, free <2400>, total<8192>
[   13.783000] [FAP0] PSM : addr<0x80002000>, used <23824>, free <752>, total <24576>
[   13.791000] [FAP1] PSM : addr<0x80002000>, used <23824>, free <752>, total <24576>
[   13.799000] [FAP0] DQM : availableMemory 14652 bytes, nextByteAddress 0xE0004948
[   13.806000] [FAP1] DQM : availableMemory 14652 bytes, nextByteAddress 0xE0004948
[   13.814000] [FAP0] GSO Buffer set to 0xAB400000
[   13.818000] [FAP1] GSO Buffer set to 0xAB500000
[   13.823000] [FAP0] FAP BPM Initialized.
[   13.827000] [FAP1] FAP BPM Initialized.
[   13.831000] bcmPktDma_bind: FAP Driver binding successfull
[   13.837000] [FAP0] FAP TM: ON
[   13.840000] [FAP1] FAP TM: ON
[   13.968000] bcmxtmcfg: bcmxtmcfg_init entry
[   14.385000] adsl: adsl_init entry
[   14.404000] modprobe used greatest stack depth: 13352 bytes left
[   14.783000] Broadcom BCM63168D0 Ethernet Network Device v0.1 Jan 21 2016 16:23:20
[   14.800000] ext_switch_spi_init: EXT_SWITCH_ID=0x53125...
[   14.806000] BCM53125 match...
[   14.810000] fapDrv_psmAlloc: fapIdx=1, size: 7392, offset=b0a20650 bytes remaining 8104
[   14.819000] ETH Init: Ch:0 - 308 tx BDs at 0xb0a20650
[   14.825000] fapDrv_psmAlloc: fapIdx=0, size: 7392, offset=b0820650 bytes remaining 8104
[   14.834000] ETH Init: Ch:1 - 308 tx BDs at 0xb0820650
[   14.839000] fapDrv_psmAlloc: wastage 8 bytes
[   14.844000] fapDrv_psmAlloc: fapIdx=0, size: 5912, offset=b0822330 bytes remaining 2184
[   14.852000] ETH Init: Ch:0 - 738 rx BDs at 0xb0822330
[   14.864000] fapDrv_psmAlloc: wastage 8 bytes
[   14.868000] fapDrv_psmAlloc: fapIdx=1, size: 5912, offset=b0a22330 bytes remaining 2184
[   14.877000] ETH Init: Ch:1 - 738 rx BDs at 0xb0a22330
[   14.912000] Broadcom GMAC Char Driver v0.1 Jan 21 2016 16:23:27 Registered<249>
[   14.919000] Broadcom GMAC Driver v0.1 Jan 21 2016 16:23:27 Initialized
[   14.927000] dgasp: kerSysRegisterDyingGaspHandler: bcmsw registered
[   14.948000] eth0: MAC Address: F8:2C:18:E2:97:55
[   14.974000] eth1: MAC Address: F8:2C:18:E2:97:55
[   14.995000] eth2: MAC Address: F8:2C:18:E2:97:55
[   15.026000] eth3: MAC Address: F8:2C:18:E2:97:55
[   15.047000] eth4: MAC Address: F8:2C:18:E2:97:55
[   15.076000] eth5: MAC Address: F8:2C:18:E2:97:55
[   15.098000] eth6: MAC Address: F8:2C:18:E2:97:55
[   15.113000] modprobe used greatest stack depth: 13264 bytes left
[   15.179000] [NTC arl] arlEnable : Enabled ARL binding to FAP
[   15.185000] Broadcom Address Resolution Logic Processor (ARL) Char Driver v0.1 Jan 21 2016 16:20:15 Registered <245>
[   15.356000] Broadcom 802.1Q VLAN Interface, v0.1
[   15.416000] BCM63XX_USB USB Device not present
modprobe: can't load module bcm_usb (extra/bcm_usb.ko): No such device

See also