Tenda AC6

From WikiDevi.Wi-Cat.RU
Jump to navigation Jump to search

Tenda AC6 v1
Availability: now

FCC approval date: 30 September 2016
Country of manuf.: China
Series: AC1200

Amazon image

ASIN
B06X1CHFJ5 (Flag of the United States.svg, On Amazon, On CCC)
multiple revisions of this device, use caution
On DealExtreme
On Newegg

Type: wireless router

FCC ID: V7TAC6
IC ID: 9034A-AC6
PCB ID: 10029756

Power: 12 VDC, 1 A
Connector type: barrel

CPU1: Broadcom BCM53573B0 (900 MHz)
FLA1: 8 MiB8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br /> (Winbond Model?)
RAM1: 64 MiB67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br /> (Winbond W9751G6KB-25)

Expansion IFs: none specified

WI1 chip1: Broadcom BCM53573B0
WI1 802dot11 protocols: an+ac
WI1 MIMO config: 2x2:2
WI1 antenna connector: none
WI2 chip1: Broadcom BCM43217
WI2 802dot11 protocols: bgn
WI2 MIMO config: 2x2:2
WI2 antenna connector: none

ETH chip1: Broadcom BCM53573B0
Switch: Broadcom BCM53573B0
LAN speed: 100M
LAN ports: 3
WAN speed: 100M
WAN ports: 1

abgn+ac

Stock bootloader: CFE 9.10.178.27 1.0.37 for BCM947XX

Stock FW OS: Linux

Default SSID: Tenda_XXXXXX (26 addl. devices)
Default IP address: 192.168.0.1
the IP 192.168.0.1 is used by 785 additional devices
of which 54 are Tenda devices

802dot11 OUI: C8:3A:35 (22 E, 34 W)
Ethernet OUI: C8:3A:35 (22 E, 34 W)

 CPU1 brandWI1 chip1 brandWI2 chip1 brand
Tenda AC6BroadcomBroadcomBroadcom
Tenda AC6 V2RealtekRealtekRealtek

For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.


AC1200 Smart Dual-Band WiFi Router

Product page  • Support page

Serial

Boot log

 • Boot log • >>
Decompressing...done
Found ST compatible serial flash with 128 64KB blocks; total size 8MB

CFE version 9.10.178.27 (r584393) based on BBP 1.0.37 for BCM947XX (32bit,SP,)
Build Date: Fri Jul  1 10:44:14 EDT 2016 (root@linux-empc)
Copyright (C) 2000-2008 Broadcom Corporation.

Init Arena
Init Devs.
Boot partition size = 262144(0x40000)
DDR Clock: 392 MHz
Info: DDR frequency set from clkfreq=900,*392*
et0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 9.10.178.27 (r584393)
CPU type 0x0: 900MHz
Tot mem: 65536 KBytes

CFE mem:    0x00F00000 - 0x017A367C (9057916)
Data:       0x00F6BA24 - 0x00F6C05C (1592)
BSS:        0x00F6C068 - 0x00FA167C (218644)
Heap:       0x00FA167C - 0x017A167C (8388608)
Stack:      0x017A167C - 0x017A367C (8192)
Text:       0x00F00000 - 0x00F5F8EC (391404)
Boot:       0x017A4000 - 0x017E4000
Reloc:      I:00000000 - D:00000000

Mac:4-95-e6-24-d5-f0 
Device eth0:  hwaddr 04-95-E6-24-D5-F0, ipaddr 192.168.1.1, mask 255.255.255.0
        gateway not set, nameserver not set
upgrade wait time is 3s
**upgrade_wait over!
Loader:raw Filesys:raw Dev:flash0.os File: Options:(null)
Loading: .... 4177792 bytes read
Entry at 0x00008000
Closing network.
Starting program at 0x00008000
[    0.890000] console [ttyS0] enabled, bootconsole disabled
[    0.910000] brd: module loaded
[    0.920000] loop: module loaded
[    0.920000] pflash: found no supported devices
[    0.930000] bcmsflash: squash filesystem found at block 30
[    0.930000] Creating 7 MTD partitions on "bcmsflash":
[    0.940000] 0x000000000000-0x000000800000 : "All"
[    0.940000] 0x000000000000-0x000000040000 : "Bootloader"
[    0.950000] 0x000000040000-0x0000007d0000 : "KernelFS"
[    0.950000] 0x0000001e488c-0x0000007d0000 : "rootfs"
[    0.960000] 0x0000007d0000-0x0000007e0000 : "CFM_BACKUP"
[    0.960000] 0x0000007e0000-0x0000007f0000 : "CFM"
[    0.970000] 0x0000007f0000-0x000000800000 : "nvram"
[    0.970000] nflash: found no supported devices
[    0.980000] PPP generic driver version 2.4.2
[    0.980000] PPP Deflate Compression module registered
[    0.990000] PPP BSD Compression module registered
[    0.990000] PPP MPPE Compression module registered
[    1.000000] NET: Registered protocol family 24
[    1.000000] u32 classifier
[    1.000000]     Actions configured
[    1.010000] Netfilter messages via NETLINK v0.30.
[    1.010000] nf_conntrack version 0.5.0 (938 buckets, 3752 max)
[    1.020000] [BM CORE     ]  INFO: online ip data hash table created, size = 199
[    1.020000] [BM CORE     ]  INFO: online_ip proc file created
[    1.030000] ctnetlink v0.93: registering with nfnetlink.
[    1.030000]  create /proc/behavior/emailbcc SUCCESSFULLY.
[    1.040000] netfilter smtp init successfully
[    1.040000] xt_time: kernel timezone is -0000
[    1.040000] Kernel:Init flow dev success.
[    1.050000] IPv4 over IPv4 tunneling driver
[    1.050000] ip_tables: (C) 2000-2006 Netfilter Core Team
[    1.060000] TCP cubic registered
[    1.060000] NET: Registered protocol family 17
[    1.060000] L2TP core driver, V2.0
[    1.070000] PPPoL2TP kernel driver, V2.0
[    1.070000] L2TP IP encapsulation support (L2TPv3)
[    1.070000] L2TP netlink interface
[    1.080000] L2TP ethernet pseudowire support (L2TPv3)
[    1.080000] 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
[    1.090000] All bugs added by David S. Miller <davem@redhat.com>
[    1.140000] Northstar brcmnand NAND Flash Controller driver, Version 0.1 (c) Broadcom Inc. 2012
[    1.150000] brcmnand: found no supported devices
[    1.160000] VFS: Mounted root (squashfs filesystem) readonly on device 31:3.
[    1.170000] devtmpfs: mounted
[    1.170000] Freeing init memory: 196K
[    1.180000] Failed to execute /sbin/preinit.  Attempting defaults...
               mkdir: can't create directory '/var/run': File exists
[    3.220000] [BM CORE     ]  INFO: bm_init success
[    3.220000] bm_debug_init_proc success!
[    3.220000] [U2K MODULE  ]  INFO: bm_u2k_info_init success
[    3.290000] [MAC FILTER  ]  INFO: bm_mac_filter init success 
[    3.410000] [PRIVILEGE IP]  INFO: privilege ip init success
[    3.500000] qos qos_init 1627: qos module init success
[    3.580000] OS TYPE INIT FINISHED
[    3.580000] [URL FILTER  ]  INFO: url filter init success
[    3.770000] fastnatconf fastnat_conf_init 611: fastnat conf module init success
 Give root password for system maintenance
(or type Control-D for normal startup):[    3.980000] udevd (353): /proc/353/oom_adj 
 is deprecated, please use /proc/353/oom_score_adj instead.
init_core_dump 1816: rlim_cur = 0, rlim_max = -1
init_core_dump 1825: open core dump success
init_core_dump 1834: rlim_cur = 5242880, rlim_max = 5242880
func:InitCfm begin load_mib....

######## STARTING PROGRAM #########
flash_read:ret = 65536
crc = a1eca6bb, newcrc = a1eca6bb
flash_read:ret = 65536
crc = 48ce1225, newcrc = 48ce1225
flash_read:ret = 65536
crc = 48ce1225, newcrc = 48ce1225
flash_to_file:open Policy failed.
going to rewrite flash...
open /etc/policy_bak.cfg failed.
rewrite flash ok...
failure to open policy source: /etc/policy.cfg
right lan[2]:0
right lan[1]:1
right lan[0]:2
right wan[0]:3
vlan_array[0]: value 0  index_num 3 name eth0 cpu_port 5index[0] 0  index[1] 1  index[2] 2  index[3] 0  index[4] 0  
vlan_array[1]: value 1  index_num 1 name eth0 cpu_port 5index[0] 3  index[1] 0  index[2] 0  index[3] 0  index[4] 0  
vlan_array[2]: value -1  index_num 1 name  cpu_port 0index[0] 4  index[1] 0  index[2] 0  index[3] 0  index[4] 0  
vlan_array[3]: value -2  index_num 0 name  cpu_port 0index[0] 0  index[1] 0  index[2] 0  index[3] 0  index[4] 0  
vlan_array[4]: value -2  index_num 0 name  cpu_port 0index[0] 0  index[1] 0  index[2] 0  index[3] 0  index[4] 0  
nvram unset vlan1ports
nvram unset vlan2ports
nvram unset vlan3ports
nvram unset vlan4ports
nvram unset vlan5ports
nvram set vlan1ports="0  1  2  5*"
nvram set vlan2ports="3  5"
#IPTV STB VLAN ID mode is disable!#
main=>116:init server success.1..
No need to start gpio thread.
[    5.070000] et: module license 'Proprietary' taints kernel.
[    5.080000] Disabling lock debugging due to kernel taint
[    5.100000] et_module_init: passivemode set to 0x0
[    5.110000] et_module_init: txworkq set to 0x0
[    5.110000] et_module_init: et_txq_thresh set to 0xce4
[    5.120000] et_module_init: et_rxlazy_timeout set to 0x3e8
[    5.120000] et_module_init: et_rxlazy_framecnt set to 0x20
[    5.130000] stbport=0=wanport=3=
[    5.150000] eth0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 9.10.178.27 (r584393)
insmod: can't read '/lib/modules/2.6.36.4brcmarm/kernel/drivers/net/proxyarp/proxyarp.ko': No such file or directory
[    7.090000] wl_module_init: passivemode set to 0x0
[    7.090000] wl_module_init: txworkq set to 0x0
[    7.120000] External imprecise Data abort at addr=0x1f4fc, fsr=0x1c06, pc=0x7f09c298 lr=0x7f17c93c ignored.
[    7.130000] External imprecise Data abort at addr=0x1f4fc, fsr=0x1c06, pc=0x7f17c8fc lr=0x8021a074 ignored.
[    7.150000] eth1: Broadcom BCM43b6 802.11 Wireless Controller 9.10.178.27 (r584393 WLTEST)
[    7.160000] PCI: Enabling device 0001:01:00.0 (0140 -> 0142)
[    7.200000] eth2: Broadcom BCM43227 802.11 Wireless Controller 9.10.178.27 (r584393 WLTEST)
sh: can't create /proc/irq/163/smp_affinity: nonexistent directory
sh: can't create /proc/irq/169/smp_affinity: nonexistent directory
ifconfig: SIOCSIFHWADDR: No such device
ifconfig: SIOCGIFFLAGS: No such device
### set br0 mac [04:95:e6:24:d5:f0]### [5]
##############add vlan devices [vconfig add eth0 1]
##############add vlan devices [vconfig add eth0 2]
[    7.490000] device eth0 entered promiscuous mode
ifconfig: SIOCSIFHWADDR: No such device
[    7.660000] device vlan1 entered promiscuous mode
[    7.680000] br0: topology change detected, propagating
[    7.690000] br0: port 1(vlan1) entering forwarding state
[    7.690000] br0: port 1(vlan1) entering forwarding state
[    7.710000] IPv4 FIB: Using LC-trie version 0.409
Sat Jan  1 00:00:00 UTC 2000
Loading dnrd...
killall: dnrd: no process killed
[compatibility:is_compatible:80] The software is compatible!
_eval 98: child process create success
_eval 98: child process create success
_start_time_check 202: time_check register success, register_pid = 456
_eval 94: child process status is 0
_start_httpd 219: httpd register success, register_pid = 457
_eval 94: child process status is 0
_start_ucloud_v2 357: ucloud_v2 register success, register_pid = 458
_eval 94: child process status is 0
_start_buisness_proc 383: buisness_proc register success, register_pid = 459
_eval 94: child process status is 0
_start_auto_discover 237: _start_auto_discover register success, register_pid = 460
auto_discover
business_proc
httpd
ucloud_v2
time_check
netctrl
[TIMER_CHECK >>time_check_reboot_info_printf(51)]:		 enable:1
[TIMER_CHECK >>time_check_reboot_info_printf(52)]:		 type:1
[TIMER_CHECK >>time_check_reboot_info_printf(57)]:		 wday_en:1;1;1;1;1;1;1
[TIMER_CHECK >>time_check_reboot_info_printf(58)]:		 start_time:03:00
[TIMER_CHECK >>time_check_reboot_info_printf(59)]:		 end_time:05:00
[TIMER_CHECK >>time_check_reboot_info_printf(60)]:		 max_speed:3
[TIMER_CHECK >>time_check_reboot_info_printf(61)]:		 check_speed=3000
[TIMER_CHECK >>time_check_reboot_info_printf(62)]:		 wan_ifnames:eth1
[TIMER_CHECK >>time_check_power_info_printf(50)]:		 enable:0
[TIMER_CHECK >>time_check_power_info_printf(51)]:		 type:1
[TIMER_CHECK >>time_check_power_info_printf(56)]:		 wday_en:1;1;1;1;1;1;1
[TIMER_CHECK >>time_check_power_info_printf(57)]:		 start_time:00:00
[TIMER_CHECK >>time_check_power_info_printf(58)]:		 end_time:07:00
[TIMER_CHECK >>time_check_power_info_printf(59)]:		 max_speed:3
[TIMER_CHECK >>time_check_power_info_printf(60)]:		 check_speed=3000
wl2g_op:0 wl5g_op:0 
fopen: No such file or directory
init_core_dump 1816: rlim_cur = 5242880, rlim_max = 5242880
init_core_dump 1825: open core dump success
init_core_dump 1834: rlim_cur = 5242880, rlim_max = 5242880
logserver.c check network 192.168.0.1 success
init_core_dump 1816: rlim_cur = 5242880, rlim_max = 5242880
init_core_dump 1825: open core dump success
init_core_dump 1834: rlim_cur = 5242880, rlim_max = 5242880

Yes:  ****** WeLoveLinux****** 

 Welcome to ...
init_core_dump 1816: rlim_cur = 5242880, rlim_max = 5242880
init_core_dump 1825: open core dump success
init_core_dump 1834: rlim_cur = 5242880, rlim_max = 5242880
######## RECEIVING DATA #########
create socket  fail -1
[httpd][debug]----------------------------webs.c,157
httpd listen ip = 192.168.0.1 port = 80
webs: Listening for HTTP requests at address 192.168.0.1
RTNETLINK answers: Operation not supported
sh: can't create /proc/br0_ip: nonexistent directory
[   10.930000] max_new_conntrack=4000 
[   11.120000] fastnatconf fastnat_conf_proc_port_add 350: layer = 3, port = 80, protocol = 6
[   11.140000] fastnatconf fastnat_conf_add_port 136: add success port = 80, protocol = 6, layer = 3
[   11.150000] fastnatconf fastnat_conf_proc_port_add 350: layer = 3, port = 443, protocol = 6
[   11.170000] fastnatconf fastnat_conf_add_port 136: add success port = 443, protocol = 6, layer = 3
[   11.180000] fastnatconf fastnat_conf_proc_port_add 350: layer = 2, port = 53, protocol = 17
[   11.200000] fastnatconf fastnat_conf_add_port 136: add success port = 53, protocol = 17, layer = 2
NetCtrl Initializing, Waiting ...
Debug->tpi_port.c: tpi_port_handle(61)--type = 0
Debug->tpi_port.c: tpi_port_mode_set(12)--wan_num=1
Debug->tpi_port.c: tpi_port_mode_set(14)--wan[0].portmode=0
sh: nkgw: not found
set port 3 to AUTO
[ DEBUG ] ******Sucessed to change lan config! ******
killall: dhttpd: no process killed
ifconfig: SIOCSIFFLAGS: Cannot assign requested address
ifconfig: SIOCSIFFLAGS: Cannot assign requested address
[ DEBUG ] 2.4G wisp enabled.
iptables: No chain/target/match by that name.
********************************
	goahead  3.3.0 start
********************************
goahead: 4: main----51
goahead: 4: initPlatform----398
goahead: 4: websOpen----233
iptables v1.4.12.2: Couldn't load target `dmz_forward_pre':No such file or directory

Try `iptables -h' or 'iptables --help' for more information.
iptables: No chain/target/match by that name.
[mac_vendor_init : 141] mac vendor list init OK!
nbns task start:
[VENDOR_DEBUG _____check_vendor_network(131)______]:Get host error!
vendor_task[171]    check vendor network failed! 
arp task satrt:
iptables v1.4.12.2: Couldn't load target `vpnserver':No such file or directory

Try `iptables -h' or 'iptables --help' for more information.
iptables: No chain/target/match by that name.
iptables v1.4.12.2: Couldn't load target `dmz_forward_post':No such file or directory

Try `iptables -h' or 'iptables --help' for more information.
NetCtrl Initializing, Waiting ...
wisp NOT_CONNECTED,  wl_not_conn_time:0 cur_time:946684804 last_time:0 
iptables: No chain/target/match by that name.
iptables: No chain/target/match by that name.
iptables: Index of insertion too big.
[ DEBUG ] 2.4G wisp enabled.
iptables: No chain/target/match by that name.
iptables: No chain/target/match by that name.
iptables v1.4.12.2: Couldn't load target `port_forward_pre':No such file or directory

Try `iptables -h' or 'iptables --help' for more information.
iptables v1.4.12.2: Couldn't load target `port_forward_post':No such file or directory

Try `iptables -h' or 'iptables --help' for more information.
iptables: No chain/target/match by that name.
iptables: No chain/target/match by that name.
goahead: 0: Can't get host address for host Tenda: errno 97, use Local:127.0.0.1
cgi/main.c check network 172.18.166.182 success
dlan_ip:172.18.166.182
endpoint[http://172.18.166.182:80]
[ DEBUG ] 2.4G wisp enabled.
iptables: No chain/target/match by that name.
iptables v1.4.12.2: Couldn't load target `web_wanadmin':No such file or directory

Try `iptables -h' or 'iptables --help' for more information.
iptables: No chain/target/match by that name.
NetCtrl Initializing, Waiting ...
iptables: No chain/target/match by that name.
wisp NOT_CONNECTED,  wl_not_conn_time:1 cur_time:946684805 last_time:946684804 
iptables v1.4.12.2: Couldn't load target `web_wanadmin':No such file or directory

Try `iptables -h' or 'iptables --help' for more information.
iptables: No chain/target/match by that name.
[ DEBUG ] 2.4G wisp enabled.
killall: 3322ip: no process killed
killall: 88ip: no process killed
killall: gnway: no process killed
NetCtrl Initializing, Waiting ...
wisp NOT_CONNECTED,  wl_not_conn_time:2 cur_time:946684806 last_time:946684805 
killall: inadyn: no process killed
rm: can't remove '/etc/ddns_*': No such file or directory
mdns task start:
NetCtrl Initializing, Waiting ...
wisp NOT_CONNECTED,  wl_not_conn_time:3 cur_time:946684807 last_time:946684806 
[ DEBUG ] 2.4G wisp enabled.
iptables: No chain/target/match by that name.
iptables v1.4.12.2: Couldn't load target `MINIUPNPD':No such file or directory

Try `iptables -h' or 'iptables --help' for more information.
iptables: No chain/target/match by that name.
NetCtrl Initializing, Waiting ...
wisp NOT_CONNECTED,  wl_not_conn_time:5 cur_time:946684809 last_time:946684807 
miniupnpd.c,865,ver=1.0,osname=Wireless Router,osver=1.0,osurl=http://192.168.0.1,manuft=Tenda,descri=
NetCtrl Initializing, Waiting ...
wisp NOT_CONNECTED,  wl_not_conn_time:6 cur_time:946684810 last_time:946684809 
[ DEBUG ] 2.4G wisp enabled.
RTNETLINK answers: No such file or directory
dhcpsCfgToStruct 555: lan type is 
dhcps_lan_dhcpc_configure 272: lan dhcp client not get ip
[url_filt[   17.870000] [URL FILTER  ]  INFO: g_uf_enable = disable
er:apply_url_filter_global_option:339] filter.url.en == 0
[url_filt[   17.910000] [URL FILTER  ]  INFO: g_uf_enable = disable
er:apply_url_filter_global_optio[   17.910000] [MAC FILTER  ]  INFO: g_mac_filter_enable = disable, mf_default_action = accept
n:339] filter.url.en == 0
[mac_filter:load_mac_global_options:361] filter.mac.en == 0[   17.920000] [MAC FILTER  ]  INFO: g_mac_filter_enable = disable, mf_default_action = accept

[mac_filter:load_mac_global_options:381] macfilter.mode == black
[mac_filter:load_mac_filter_cfg:442] macfilter.black.id count == 0
[mac_filter:load_parent_control_cfg:507] parent.control.id count ==[   17.950000] qos qos_rcv_msg 261: ------APPLY---
 0
[[   17.950000] qos qos_rule_apply 526: g_qos_enable = disable
mac_filter:refresh_mac_filter_to_kernel:573] l_mac_filter_changed: 1; l_mac_filter.enable[   17.960000] qos qos_rcv_msg 289: ------AUTO_APPLY---
: 0
[mac_filter:apply_mac_filter_global_option:558] enable:0; black_white: 0
[mac_filter:apply_mac_filter_global_option:558] enable:0; black_white: 0
[   17.990000] qos set_wan_if 1086: wanid=0 up_rate=1024000 down_rate=0
[   17.990000] qos set_wan_if 1086: wanid=1 up_rate=0 down_rate=0
[   18.010000] qos set_wan_if 1086: wanid=2 up_rate=0 down_rate=0
[   18.010000] qos set_wan_if 1086: wanid=3 up_rate=0 down_rate=0
[   18.060000] Init gsbmac dev success.
[   18.060000] The ARP attack defence is init v1 successful
killall: arpbrocast: no process killed
[   18.130000] Kernel:Init attack fence dev success.
[   18.130000] the ddos ip attack defnence init successful
[   18.150000] SET_LAN_PARAM_DATA k_data:
[   18.150000] 	lan ip:3232235521
[   18.150000] 	lan mask:4294967040
[   18.160000] 	lan submask:3232235520
[   18.160000] 	lan interface:br0
[   18.160000] 	lan http port:80
icmp is 1,1500,u[   18.170000] set the proceee ture
dp is 1,1500,tcp[   18.170000] SET_IPOP_FENCE_ATTACK_DATA k_data:
_syn is 1,1500
[   18.180000] 	ip options:32512
[   18.180000] SET_BAD_PKT_FENCE_ATTACK_DATA k_data:
[   18.180000] 	bad pkt:248
[   18.190000] SET_DDOS_FENCE_ATTACK_DATA k_data:
[   18.190000] 	status:7
[   18.190000] 	tcp threshold:1500
[   18.200000] 	udp threshold:1500
[   18.200000] 	icmp threshold:1500
NetCtrl Initializing, Waiting ...
---------->>[ start_wifi, wl_rate=24 ]
63052602
CJ+++++set wl1 value = auto
[extra_set_nvram:468] set wl1_macmode == disabled
killall: wps_monitor: no process killed
killall: nas: no process killed
killall: eapd: no process killed
[ DEBUG ] len=0,lan1_ifnames =
[ ERROR ] Do not exsit ifname of guest_network,do nothing!
killall: udhcpc: no process killed
killall: dnrd-wisp: no process killed
killall: pppoecd: no process killed
iptables: No chain/target/match by that name.
wisp NOT_CONNECTED,  wl_not_conn_time:7 cur_time:946684811 last_time:946684810 
iptables v1.4.12.2: Couldn't load target `wisp_mangle_pre':No such file or directory

Try `iptables -h' or 'iptables --help' for more information.
iptables: No chain/target/match by that name.
iptables v1.4.12.2: Couldn't load target `wisp_mangle_post':No such file or directory

Try `iptables -h' or 'iptables --help' for more information.
[   19.380000] CJ++ init gpioouten in hw_init status 1
[   19.410000] low power set pwr_percent 94
[   19.420000] low power set pwr_percent 94
___131___tpi_wifi_unset_intf__ifconfig eth2 0.0.0.0____[ DEBUG ] dev = eth2
###fd failed to recv packet!###
##### NO SERVER FOUND! #####
iptables: Bad rule (does a matching rule exist in that chain?).
iptables: Bad rule (does a matching rule exist in that chain?).
NetCtrl Initializing, Waiting ...
iptables: Bad rule (does a matching rule exist in that chain?).
iptables: Bad rule (does a matching rule exist in that chain?).
iptables: Bad rule (does a matching rule exist in that chain?).
iptables: Bad rule (does a matching rule exist in that chain?).
iptables: Bad rule (does a matching rule exist in that chain?).
killall: acsd: no process killed
eth2: WLC_SET_VAR(bsscfg:radio_pwrsave_enable): Operation not permitted
eth2: WLC_SET_VAR(bsscfg:radio_pwrsave_enable): Operation not permitted
eth2: WLC_SET_VAR(chanspec): Invalid argument
eth2: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supported
eth2: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supported
eth2: WLC[   19.810000] CJ++ init gpioouten in hw_init status 1
_SET_VAR(ampdu_retry_limit_tid): Operation not supported
eth2: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supported
eth2: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supported
eth2: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supported
eth2: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supported
eth2: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supported
eth2: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported
eth2: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported
eth2: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported
eth2: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported
eth2: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported
eth2: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation no[   19.880000] 
 device wl1.1 entered promiscuous mode t supported 
eth[   19.890000] br0: topology change detected, propagating
2: WLC_SET_VAR(a[   19.890000] br0: port 2(wl1.1) entering forwarding state
mpdu_rr_retry_li[   19.900000] br0: port 2(wl1.1) entering forwarding state
mit_tid): Operation not supported
eth2: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported
eth2: WLC_SET_VAR(avg_dma_xfer_rate): Operation not supported
eth2: WLC_SET_VAR(taf): Operation not supported
NET: Setting wl1.1 hw addr to 04:95:E6:24:D5:F1
NET: Error setting hw for wl1.1; returned -1
Invalid instance identifier br0

eth2: WLC_SET_VAR(trf_mgmt_config): Invalid argument
[   20.020000] wisp or APC is open 
eth1: WLC_GET_VAR(psta_if): Invalid argument
[ DEBUG ] len=0,lan1_ifnames =
[ ERROR ] Do not exsit ifname of guest_network,do nothing!
wisp NOT_CONNECTED,  wl_not_conn_time:8 cur_time:946684812 last_time:946684811 
iptables: No chain/target/match by that name.
[ DEBUG ] dev = eth2
iptables: Bad rule (does a matching rule exist in that chain?).
NetCtrl Initializing, Waiting ...
iptables: Bad rule (does a matching rule exist in that chain?).
iptables: Bad rule (does a matching rule exist in that chain?).
iptables: Bad rule (does a matching rule exist in that chain?).
iptables: Bad rule (does a matching rule exist in that chain?).
iptables: Bad rule (does a matching rule exist in that chain?).
iptables: Bad rule (does a matching rule exist in that chain?).
[ DEBUG ] dev = eth2
iptables: No chain/target/match by that name.
rm: can't remove '/etc/resolv.conf': No such file or directory
===name(eth1) unit(0)===
td_acs >>td_acs_init_dev_name(2976): ifname eth1: radio is on
td_acs >>td_acs_init_dev_name(2986): ifname eth1: auto channel is enable
===name(eth2) unit(1)===
td_acs >>td_acs_init_dev_name(2976): ifname eth2: radio is on
td_acs >>td_acs_init_dev_name(2986): ifname eth2: auto channel is enable
td_acs >>td_acs_init_cfg(594): set invalid ch:12
td_acs >>td_acs_init_cfg(594): set invalid ch:13
td_acs >>td_acs_init_cfg(610): noise_th=(-88, -65) busy_th=(20, 73) loop(1) cs_timer(900s)
eth1: WLC_GET_VAR(bw_cap): Invalid argument
td_acs >>td_acs_init_rsi(654): failed to get bw_capret code: -1
td_acs >>td_acs_info_init(735): dev(eth1) acs_init_rsi fail
====td_acs_exit====
---------->>[ start_wifi, wl_rate=5 ]
63052602
[ ERROR ] coutry_code=PL
CJ++set wl0 value = auto
wisp NOT_CONNECTED,  wl_not_conn_time:9 cur_time:946684813 last_time:946684812 
NetCtrl Initializing, Waiting ...
killall: wps_monitor: no process killed
[ DEBUG ] len=0,lan1_ifnames =
[ ERROR ] Do not exsit ifname of guest_network,do nothing!
killall: acsd: n[   21.670000] CJ++ init gpioouten in hw_init status 1
o process killed
eth1: cmd=231: Invalid argument
eth1: WLC_SET_VAR(bsscfg:radio_pwrsave_enable): Operation not permitted
eth1: WLC_SET_VAR(chanspec): Invalid argument
eth1: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supported
eth1: WLC_SET_VAR(ampdu_retry_limit_tid): Oper[   21.810000] 
CJ++ init gpioouten in hw_init status 1:  Operation not supported
eth1: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supported
eth1: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supported
eth1: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supported
eth1: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supported
eth1: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supported
eth1: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supported
eth1: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported
eth1: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported
eth1: WLC_SET_VAR(ampdu_rr_retry_limit_tid): 
[   21.860000] low power set pwr_percent 88
Operation not supported
[   21.870000] low power set pwr_percent 88 pported
eth1: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported
eth1: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported
eth1: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not 
[   21.890000] device eth1 entered promiscuous mode supported
eth1:[   21.890000] br0: topology change detected, propagating
 WLC_SET_VAR(amp[   21.900000] br0: port 3(eth1) entering forwarding state
du_rr_retry_limi[   21.900000] br0: port 3(eth1) entering forwarding state
t_tid): Operation not supported
eth1: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported
eth1: WLC_SET_VAR(avg_dma_xfer_rate): Operation not supported
eth1: WLC_SET_VAR(taf): Operation not supported
eth1: cmd=64: Operation not supported
Invalid instance identifier br0

device br1 already exists; can't create bridge with the same name
[   21.970000] low power set pwr_percent 88
[   22.000000] wisp or APC is close 
[ DEBUG ] len=0,lan1_ifnames =
[ ERROR ] Do not exsit ifname of guest_network,do nothing!
===name(eth1) unit(0)===
td_acs >>td_acs_init_dev_name(2976): ifname eth1: radio is on
td_acs >>td_acs_init_dev_name(2986): ifname eth1: auto channel is enable
===name(eth2) unit(1)===
td_acs >>td_acs_init_dev_name(2976): ifname eth2: radio is on
td_acs >>td_acs_init_dev_name(2986): ifname eth2: auto channel is enable
td_acs >>td_acs_init_cfg(594): set invalid ch:12
td_acs >>td_acs_init_cfg(594): set invalid ch:13
td_acs >>td_acs_init_cfg(610): noise_th=(-88, -65) busy_th=(20, 73) loop(1) cs_timer(900s)
td_acs >>td_acs_init_rsi(662): band_type:1 bw_cap: 7 coex_enb:1
td_acs >>td_acs_init_width_level(712): Width level: 5g_80=40, 5g_40=73.
Interface eth1 scan channels: 36, 40, 44, 48  
===td_acs_scan_timer_func==(eth1)==
td_acs >>td_acs_scan_timer_func(2087): band_type:1 bw_cap: 7 coex_enb:1
td_acs_scan_prep: passive_time=250
td_acs >>td_acs_scan_prep(790): scan channel number: 19
td_acs >>td_acs_scan_prep(793): params size: 102
td_acs: (eth1) scan in progress ...
[   22.370000] low power set pwr_percent 88
wisp NOT_CONNECTED,  wl_not_conn_time:10 cur_time:946684814 last_time:946684813 
NetCtrl Initializing, Waiting ...
td_acs: (eth1) scan in progress ...
[   22.630000] low power set pwr_percent 88
td_acs: (eth1) scan in progress ...
[   22.890000] low power set pwr_percent 88
td_acs: (eth1) scan in progress ...
[   23.150000] low power set pwr_percent 88
td_acs >>td_acs_get_scan(974): l[   23.390000] low power set pwr_percent 88
ist->count: 3, l[   23.390000] low power set pwr_percent 88
ist->buflen: 104[   23.400000] low power set pwr_percent 88
4
td_acs >>td_acs_adjust_second_chan(1727): ctr[   23.400000] low power set pwr_percent 88
l_ch:48 middle: [   23.410000] low power set pwr_percent 88
0=46 1=50
td_ac[   23.410000] low power set pwr_percent 88
s >>td_acs_adjust_second_chan(1751): selected mid: 0=46
td_acs >>td_acs_adjust_second_chan(1762): Final selected chanspec: 0xd92e
td_acs >>td_acs_run_scan_select(2019): [AUTO_CHANNEL] select chanspec d92e(#48)
td_acs: [2000/01/01 00:00:15]: WiFi 5G(eth1) bandwidth change from 40MHz to 80MHz, reason busy=1
td_acs >>td_acs_adjust_bandwidth(1960): Last adjust bandwidth chanspec is 0xe32a(#48).
td_acs: selected_chspec=0xe32a
td_acs >>td_acs_init_cfg(594): set invalid ch:12
td_acs >>td_acs_init_cfg(594): set invalid ch:13
td_acs >>td_acs_init_cfg(610): noise_th=(-88, -65) busy_th=(20, 73) loop(1) cs_timer(900s)
td_acs >>td_acs_init_rsi(662): band_type:2 bw_cap: 3 coex_enb:1
td_acs >>td_acs_init_width_level(695): Width level: 2g_40=3, 2g_20=26.
Interface eth2 scan channels: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13  
===td_acs_scan_timer_func==(eth2)==
td_acs >>td_acs_scan_timer_func(2087): band_type:2 bw_cap: 3 coex_enb:1
td_acs_scan_prep: passive_time=250
td_acs >>td_acs_scan_prep(790): scan channel number: 13
td_acs >>td_acs_scan_prep(793): params size: 90
NetCtrl Initializing, Waiting ...
wisp NOT_CONNECTED,  wl_not_conn_time:12 cur_time:946684816 last_time:946684814 
td_acs: (eth2) scan in progress ...
td_acs: (eth2) scan in progress ...
td_acs: (eth2) scan in progress ...
td_acs: (eth2) scan in progress ...
NetCtrl Initializing, Waiting ...
wisp NOT_CONNECTED,  wl_not_conn_time:13 cur_time:946684817 last_time:946684816 
td_acs: (eth2) scan in progress ...
td_acs: (eth2) scan in progress ...
td_acs: (eth2) scan in progress ...
info, udhcp client (v0.9.8) started
td_acs: (eth2) scan in progress ...
NetCtrl Initializing, Waiting ...
wisp NOT_CONNECTED,  wl_not_conn_time:14 cur_time:946684818 last_time:946684817 
td_acs: (eth2) scan in progress ...
td_acs: (eth2) scan in progress ...
td_acs: (eth2) scan in progress ...
td_acs: (eth2) scan in progress ...
NetCtrl Initializing, Waiting ...
wisp NOT_CONNECTED,  wl_not_conn_time:15 cur_time:946684819 last_time:946684818 
td_acs: (eth2) scan in progress ...
td_acs >>td_acs_get_scan(974): list->count: 13, list->buflen: 3556
td_acs >>td_acs_run_scan_select(2019): [AUTO_CHANNEL] select chanspec 1006(#6)
td_acs >>td_acs_adjust_bandwidth(1960): Last adjust bandwidth chanspec is 0x1006(#6).
td_acs: selected_chspec=0x1006
msg str: [cfm Post time_check 4?relate_module_id=19,string_info=first_time_start]
[TIMER_CHECK >>init_time_check_module_var(146)]:key = relate_module_id,value = 19
[TIMER_CHECK >>init_time_check_module_var(154)]:key = string_info,value = first_time_start
tpi_sntp_handle(99): start sntp...
tpi_set_user_policy,35: entry count:0
systime_server = 211.138.200.208
main,335,sntp_en =1,tz=14.00,checktime=86400
[ DEBUG ] lan dhcp not enable
[ DEBUG ] *****netctrl init module entries ok.*****
[ DEBUG ] msg:19?op=3,wl_rate=24
[ DEBUG ] key = op,value = 3
[ DEBUG ] key = wl_rate,value = 24
63052602
CJ++++++set wl1 value = auto
create socket  fail -1
create socket  fail -1
sh: u_yunsafe: not found
[extra_set_nvram:468] set wl1_macmode == disabled
killall: wps_monitor: no process killed
[ DEBUG ] len=0,lan1_ifnames =
[ ERROR ] Do not exsit ifname of guest_network,do nothing!
killall: pppoecd: no process killed
wisp NOT_CONNECTED,  wl_not_conn_time:0 cur_time:946677620 last_time:946684819 
iptables: No chain/target/match by that name.
iptables v1.4.12.2: Couldn't load target `wisp_mangle_pre':No such file or directory

Try `iptables -h' or 'iptables --help' for more information.
iptables: No chain/target/match by that name.
iptables v1.4.12.2: Couldn't load target `wisp_mangle_post':No such file or directory

Try `iptables -h' or 'iptables --help' for more information.
___131___tpi_wifi_unset_intf__ifconfig eth2 0.0.0.0____[ DEBUG ] dev = eth2
cfg->wl2g_radio_enable=1,cfg->wl5g_radio_enable=1
[   28.790000] br0: port 2(wl1.1) entering forwarding state
[   28.800000] device wl1.1 left promiscuous mode
[   28.800000] br0: port 2(wl1.1) entering disabled state
cfg->wl2g_radio_enable=1,cfg->wl5g_radio_enable=1
[   28.810000] CJ++ init gpioouten in hw_init status 1
eth2: WLC_SET_VAR(bsscfg:radio_pwrsave_enable): Operation not permitted
eth2: WLC_SET_VAR(bsscfg:radio_pwrsave_enable): Operation not permitted
eth2: WLC_SET_VAR(chanspec): Invalid argument
eth2: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supported
eth2: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supp[   28.910000] CJ++ init gpioouten in hw_init status 1
orted
eth2: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supported
eth2: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supported
eth2: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supported
eth2: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supported
eth2: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supported
eth2: WLC_SET_VAR(ampdu_retry_limit_tid): Operation not supported
eth2: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported
eth2: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported
eth2: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported
eth2: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported
eth2: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported
eth2: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported
eth2: WLC_SET_VAR(a[   28.990000] device wl1.1 entered promiscuous mode
mpdu_rr_retry_li[   28.990000] br0: topology change detected, propagating
mit_tid): Operat[   29.000000] br0: port 2(wl1.1) entering forwarding state
ion not supporte[   29.000000] br0: port 2(wl1.1) entering forwarding state
d
eth2: WLC_SET_VAR(ampdu_rr_retry_limit_tid): Operation not supported
eth2: WLC_SET_VAR(avg_dma_xfer_rate): Operation not supported
eth2: WLC_SET_VAR(taf): Operation not supported
NET: Setting wl1.1 hw addr to 04:95:E6:24:D5:F1
NET: Error setting hw for wl1.1; returned -1
Invalid instance identifier br0

device br1 already exists; can't create bridge with the same name
eth2: WLC_SET_VAR(trf_mgmt_config): Invalid argument
[   29.090000] wisp or APC is open 
[ DEBUG ] len=0,lan1_ifnames =
[ ERROR ] Do not exsit ifname of guest_network,do nothing!
iptables: Chain already exists.
wisp NOT_CONNECTED,  wl_not_conn_time:1 cur_time:946677621 last_time:946677620 
[ DEBUG ] dev = eth2
iptables: Bad rule (does a matching rule exist in that chain?).
iptables: Bad rule (does a matching rule exist in that chain?).
iptables: Bad rule (does a matching rule exist in that chain?).
iptables: Bad rule (does a matching rule exist in that chain?).
iptables: Bad rule (does a matching rule exist in that chain?).
iptables: Bad rule (does a matching rule exist in that chain?).
iptables: Bad rule (does a matching rule exist in that chain?).
[ DEBUG ] dev = eth2
===name(eth1) unit(0)===
td_acs >>td_acs_init_dev_name(2976): ifname eth1: radio is on
td_acs >>td_acs_init_dev_name(2986): ifname eth1: auto channel is enable
===name(eth2) unit(1)===
td_acs >>td_acs_init_dev_name(2976): ifname eth2: radio is on
td_acs >>td_acs_init_dev_name(2986): ifname eth2: auto channel is enable
td_acs >>td_acs_init_cfg(594): set invalid ch:12
td_acs >>td_acs_init_cfg(594): set invalid ch:13
td_acs >>td_acs_init_cfg(610): noise_th=(-88, -65) busy_th=(20, 73) loop(1) cs_timer(900s)
td_acs >>td_acs_init_rsi(662): band_type:1 bw_cap: 7 coex_enb:1
td_acs >>td_acs_init_width_level(712): Width level: 5g_80=40, 5g_40=73.
Interface eth1 scan channels: 36, 40, 44, 48  
===td_acs_scan_timer_func==(eth1)==
td_acs >>td_acs_scan_timer_func(2087): band_type:1 bw_cap: 7 coex_enb:1
td_acs_scan_prep: passive_time=250
td_acs >>td_acs_scan_prep(790): scan channel number: 19
td_acs >>td_acs_scan_prep(793): params size: 102
td_acs: (eth1) scan in progress ...
[   30.230000] low power set pwr_percent 88
wisp NOT_CONNECTED,  wl_not_conn_time:2 cur_time:946677622 last_time:946677621 
td_acs: (eth1) scan in progress ...
[   30.500000] low power set pwr_percent 88
td_acs: (eth1) scan in progress ...
[   30.760000] low power set pwr_percent 88
td_acs: (eth1) scan in progress ...
[   31.020000] low power set pwr_percent 88
[   31.020000] low power set pwr_percent 88
[   31.030000] low power set pwr_percent 88
td_acs >>td_acs_get_scan(974): l[   31.250000] low power set pwr_percent 88
ist->count: 3, l[   31.250000] low power set pwr_percent 88
ist->buflen: 104[   31.260000] low power set pwr_percent 88
4
td_acs >>td_acs_adjust_second_chan(1727): ctr[   31.260000] low power set pwr_percent 88
l_ch:44 middle: [   31.270000] low power set pwr_percent 88
0=42 1=46
td_ac[   31.270000] low power set pwr_percent 88
s >>td_acs_adjust_second_chan(1751): selected mid: 0=42
td_acs >>td_acs_adjust_second_chan(1759): selected:0xd92a is invaild,use org:0xd82e
td_acs >>td_acs_adjust_second_chan(1762): Final selected chanspec: 0xd82e
td_acs >>td_acs_run_scan_select(2019): [AUTO_CHANNEL] select chanspec d82e(#44)
td_acs: [2000/01/01 00:00:23]: WiFi 5G(eth1) bandwidth change from 40MHz to 80MHz, reason busy=2
td_acs >>td_acs_adjust_bandwidth(1960): Last adjust bandwidth chanspec is 0xe22a(#44).
td_acs: selected_chspec=0xe22a
td_acs >>td_acs_init_cfg(594): set invalid ch:12
td_acs >>td_acs_init_cfg(594): set invalid ch:13
td_acs >>td_acs_init_cfg(610): noise_th=(-88, -65) busy_th=(20, 73) loop(1) cs_timer(900s)
td_acs >>td_acs_init_rsi(662): band_type:2 bw_cap: 3 coex_enb:1
td_acs >>td_acs_init_width_level(695): Width level: 2g_40=3, 2g_20=26.
Interface eth2 scan channels: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13  
===td_acs_scan_timer_func==(eth2)==
td_acs >>td_acs_scan_timer_func(2087): band_type:2 bw_cap: 3 coex_enb:1
td_acs_scan_prep: passive_time=250
td_acs >>td_acs_scan_prep(790): scan channel number: 13
td_acs >>td_acs_scan_prep(793): params size: 90
eth2: cmd=50: Device or resource busy
td_acs >>td_acs_run_cs_scan(912): WLC_SCAN failedtd_acs >>td_acs_run_scan_select(1989): acs_run_cs_scan fail 
[TIMER_CHECK >>init_time_check_module_var(146)]:key = string_info,value = wifi_connect_init
wisp NOT_CONNECTED,  wl_not_conn_time:3 cur_time:946677623 last_time:946677622 
===td_acs_scan_timer_func==(eth2)==
td_acs >>td_acs_scan_timer_func(2087): band_type:2 bw_cap: 3 coex_enb:1
td_acs_scan_prep: passive_time=250
td_acs >>td_acs_scan_prep(790): scan channel number: 13
td_acs >>td_acs_scan_prep(793): params size: 90
wisp NOT_CONNECTED,  wl_not_conn_time:4 cur_time:946677624 last_time:946677623 
td_acs: (eth2) scan in progress ...
td_acs: (eth2) scan in progress ...
td_acs: (eth2) scan in progress ...
td_acs: (eth2) scan in progress ...
wisp NOT_CONNECTED,  wl_not_conn_time:5 cur_time:946677625 last_time:946677624 
td_acs: (eth2) scan in progress ...
td_acs: (eth2) scan in progress ...
td_acs: (eth2) scan in progress ...
info, udhcp client (v0.9.8) started
td_acs: (eth2) scan in progress ...
wisp NOT_CONNECTED,  wl_not_conn_time:6 cur_time:946677626 last_time:946677625 
td_acs: (eth2) scan in progress ...
td_acs: (eth2) scan in progress ...
td_acs: (eth2) scan in progress ...
wisp NOT_CONNECTED,  wl_not_conn_time:7 cur_time:946677627 last_time:946677626 
td_acs: (eth2) scan in progress ...
td_acs: (eth2) scan in progress ...
td_acs >>td_acs_get_scan(974): list->count: 16, list->buflen: 4500
td_acs >>td_acs_run_scan_select(2019): [AUTO_CHANNEL] select chanspec 1002(#2)
td_acs >>td_acs_adjust_bandwidth(1960): Last adjust bandwidth chanspec is 0x1002(#2).
td_acs: selected_chspec=0x1002
wisp NOT_CONNECTED,  wl_not_conn_time:8 cur_time:946677628 last_time:946677627 
wisp NOT_CONNECTED,  wl_not_conn_time:9 cur_time:946677629 last_time:946677628 
wisp NOT_CONNECTED,  wl_not_conn_time:10 cur_time:946677630 last_time:946677629 
wisp NOT_CONNECTED,  wl_not_conn_time:11 cur_time:946677631 last_time:946677630 
wisp NOT_CONNECTED,  wl_not_conn_time:13 cur_time:946677633 last_time:946677631 
wisp NOT_CONNECTED,  wl_not_conn_time:14 cur_time:946677634 last_time:946677633 
wisp NOT_CONNECTED,  wl_not_conn_time:15 cur_time:946677635 last_time:946677634 
wisp NOT_CONNECTED,  wl_not_conn_time:16 cur_time:946677636 last_time:946677635 
wisp NOT_CONNECTED,  wl_not_conn_time:17 cur_time:946677637 last_time:946677636 
wisp NOT_CONNECTED,  wl_not_conn_time:18 cur_time:946677638 last_time:946677637 
===td_acs_run_scan_mark==(eth1) mark:0==
===td_acs_run_scan_mark==(eth2) mark:0==
wisp NOT_CONNECTED,  wl_not_conn_time:19 cur_time:946677639 last_time:946677638 
wisp NOT_CONNECTED,  wl_not_conn_time:20 cur_time:946677640 last_time:946677639 
wisp NOT_CONNECTED,  wl_not_conn_time:21 cur_time:946677641 last_time:946677640 
wisp NOT_CONNECTED,  wl_not_conn_time:22 cur_time:946677642 last_time:946677641 
wisp NOT_CONNECTED,  wl_not_conn_time:23 cur_time:946677643 last_time:946677642 
wisp NOT_CONNECTED,  wl_not_conn_time:24 cur_time:946677644 last_time:946677643 
wisp NOT_CONNECTED,  wl_not_conn_time:25 cur_time:946677645 last_time:946677644 
Decompressing...done

<< WTF - DEBUG ?? >>